Introduction

This IDE/ATAPI to SATA adapter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port.

The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer SATA drive and older motherboard designs, allowing you to connected newer SATA drives to a older IDE motherboard port and in turn eliminating the need to upgrade the motherboard for the sake of compatibility with the drives.

Saving time and hassle, the IDE to SATA adapter can be connected through simple plug and play installation and is backed by StarTech.com s Lifetime Warranty and free lifetime technical support.

Benefits

• Connect a SATA drive to an IDE system without having to install any special drivers or software
• Backed by a StarTech.com lifetime warranty and free lifetime technical support

Features

• Connect a SATA device to an IDE/ATA motherboard or controller card
• Complete hardware solution; no software required
• Support for 48-bit Logical Block Addressing (LBA)
• Compliant with SATA revision 1.0 specification
• Compatible with Ultra ATA 133 specification

Specification

Connector Type(s): IDE (40 Pin, EIDE/PATA) Male

SATA Data & Power Combo (7+15 pin) Receptacle

SP4 (4 pin, Small Drive Power) Male

Operating Temperature: 5°C to 50°C (40°F to 122°F)

Storage Temperature: -25°C to 80°C (-13°F to 176°F)

Humidity: 15~90% RH

Interface: IDE

Drive Size: 2.5in & 3.5in

Compatible Drive Types: SATA

Chipset ID: Marvell - 88SA8052

Shipping (Package) Weight: 0.1 kg [0.2 lb]

Maximum Data Transfer Rate: 133MB/sec

RAID: No

Enclosure Type: Steel and Plastic

Product Length: 75.5 mm [3 in]

Product Width: 20 mm [0.8 in]

Product Height: 23 mm [0.9 in]

Product Weight: 15 g [0.5 oz]

OS Compatibility: OS independent; No software or drivers required

System and Cable Requirements: An IDE controller and ATA cable (not included).

Included in Package: IDE to SATA adapter

LP4 Molex to SP4 Power Cable

Instruction Manual