Introduction

The Zyxel WAC500H is designed for per-room deployment scenarios. It turns an Ethernet wall plate into not only a wireless access point to provide WiFi service but also a Gigabit switch with PoE, powering a VoIP phone for last-mile network services.

Specifications

Data transmission
Ethernet LAN data rates	10,100,1000 Mbit/s
Maximum data transfer rate	1200 Mbit/s
Performance
2.4 GHz	Yes
5 GHz	Yes
Wireless isolation	Yes
Wi-Fi Multimedia (WMM)/(WME)	Yes
Auto Wireless Distribution System (WDS)	Yes
Transmitting power	26 dBmW
Web-based management	Yes
VLAN support	Yes
Receiver sensitivity	-99 dBm
Networking standards	IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11k,IEEE 802.11n,IEEE 802.11r,IEEE 802.11v,IEEE 802.1x,IEEE 802.3af,IEEE 802.3at
Ethernet LAN data rates	10,100,1000 Mbit/s
Channel bandwidth	80 MHz
Certification	FCC 15C, FCC 15E; ETSI EN 300 328, EN 301 893; LP0002, EN 60601-1-2 FCC 15B, EN 301 489-1; EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, BSMI CNS13438 EN 60950-1, IEC 60950-1; BSMI CNS14336-1
Maximum data transfer rate	1200 Mbit/s
MIMO type	Multi User MIMO
MIMO	Yes
Band steering	Yes
Ports & interfaces
Ethernet LAN (RJ-45) ports	3
DC-in jack	Yes
Power
Output voltage	12 V
Output current	1 A
Power over Ethernet (PoE)	Yes
Input voltage	100 - 240 V
Input frequency	50/60 Hz
Input current	0.3 A