Introduction

The R300WN22ODE Outdoor Wireless Access Point lets you add 2.4GHz Wireless-N network coverage to an outdoor area, through a ruggedized industrial access point.

This outdoor access point features an IP67 certified, die-cast metal enclosure with heavy-duty cable grommets so it can withstand the outdoor elements and offers pole and wall-mounting options. Plus, the PoE-powered AP includes a passive Power-over-Ethernet injector, enabling you to install it in locations where a typical power outlet is unavailable. PoE pass-through via the secondary LAN port lets you connect data and power to a PoE-capable device near the access point.

For optimal wireless coverage, the AP broadcasts a signal through a high-powered 800mW internal 10dBi 2T2R antenna, with 802.11b/g/n compatibility to easily connect most wireless devices new or old.

The device offers support for several different operating modes (AP, WDS and WISP), which help you to create a wireless network from a wired connection, bridge multiple APs together or extend the range of an existing wireless network. The AP supports Wireless-N data rates up to 300Mbps with security through WEP, WPA, or WPA2 authentication, all configurable through an easy-to-use web-based utility.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Benefits

• Withstand the harsh elements, with the rugged metal IP67 rated housing
• Customize your wireless network as needed, with support for several operating modes
• Deploy a PoE network device in remote locations with a secondary PoE pass-through LAN port

Features

• IEEE 802.11b/g/n (Wireless-N) compliant with speeds up to 300 Mbps @ 2.4GHz
• Metal, IP67 certified pole and wall-mountable housing
• PoE-powered access point with included PoE injector and PoE pass-through
• Supports AP, WDS and WISP operating modes
• 800mW internal 10dBi 2T2R antenna
• Supports WEP, WPA and WPA2 security with TKIP/AES encryption
• Integrated MAC address control and QoS support
• Built-in configuration utility (web-based)
• +/-15kV air and +/-8kV contact ESD (Electrostatic Discharge) Protection

Specification

Connector Type(s): Wireless N (IEEE 802.11n)

Internal Ports: RJ-45 Female

Operating Temperature: -30°C to 60°C (-22°F to 140°F)

Storage Temperature: -30°C to 85°C (-22°F to 185°F)

Humidity: 100% RH Non-Condensing

Interface: Wireless Ethernet

Antenna Configuration: 2x2: 2 (TxR: S)

Industry Standards: IEEE 802.3, IEEE 802.3u IEEE 802.11b/g/n

IP67 certified

Chipset ID: Atheros - AR9341

LED Indicators: Wireless Signal Strength

Power

LAN Link / Activity

Shipping (Package) Weight: 1246 g [44 oz]

Maximum Data Transfer Rate: 300 Mbps

Max Distance: 3.7 km (2.3 mi)

Bandwidth: 20/40 MHz

Full Duplex Support: Yes

Frequency Range: 2.4 ~ 2.4835 GHz

Modulation: OFDM, DSSS

Security Features: TKIP/AES

WEP Data Encryption

WPA and WPA2-PSK Data Encryption

WPA and WPA2 Enterprise Data Encryption

Supported Protocols: CSMA/CA

Color: Gray

Enclosure Type: Aluminum and Plastic

Product Length: 161 mm [6.3 in]

Product Width: 100 mm [3.9 in]

Product Height: 58 mm [2.3 in]

Product Weight: 686 g [24.2 oz]

Power Source: AC Adapter Included

Input Voltage: 100 ~ 240 AC

Input Current: 1 A

Output Voltage: 48 DC

Output Current: 0.5 A

Center Tip Polarity: Positive

Plug Type: N

Power Consumption (In Watts): 13.5

System and Cable Requirements: Available indoor AC electrical outlet

Cat 5 (or better) network cabling from PoE Injector to Wireless AP and PoE Injector to LAN Switch/router (no more than 100m total)

Included in Package: Outdoor Wireless Access Point

PoE Injector

Pole Mounting Kit

Power Adapter

Quick Start Guide