Introduction
The Atlona AT-HDVS-200-TX is a 3×1 switcher and HDBaseT transmitter with two HDMI inputs and a VGA input with audio. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded audio, control, and Ethernet can be transmitted up to 330 feet (100 meters). The two-channel audio input can be assigned to any of the video inputs and embedded for HDBaseT transmission. The HDVS-200-TX is designed for use with the AT-HDVS-200-RX HD scaling receiver or AT-OME-RX21 4K scaling receiver, but can also be used with the AT-UHD-EX-100CE-RX-PSE receiver or AT-HDVS-SC-RX premium scaling receiver, as well as Atlona switchers and matrix switchers with HDBaseT inputs. This transmitter can serve as an integral component of a fully automated AV system, with the convenience of automatic input selection and display control. It is remotely powered by the HDVS-200-RX or other Atlona HDBaseT-equipped devices through Power over Ethernet (PoE).
Highlights
All-in-One Switcher, Controller, and
Extender
The HDVS-200-TX combines the benefits of auto-switching and integrated
display control, and the advantages of HDBaseT signal transmission. It
enables input selection, volume, and display on/off control from the
front panel or external RS-232 or TCP/IP commands. The HDVS-200-TX
incorporates many popular integration convenience features while
delivering excellent value for classrooms, huddle rooms, and meeting
spaces.
Surface mounting brackets are provided with the HDVS-200-TX for easy
under-table, furniture, or on-wall installation.
Automatic Display Control
The HDVS-200-TX provides control to a display through TCP/IP, RS-232,
or CEC*, without the need for a separate control system. This
simplifies system design and integration while reducing costs. With
automatic display control, the HDVS-200-TX can trigger a display to
power on automatically whenever a laptop or other device is connected.
At the end of the presentation, when the presenter disconnects the
laptop, the HDVS-200-TX forces the display to power off. Ease of
presenter interaction with the system, and the savings incurred by
automatic display shutdown provide a significant return on investment.
The HDVS-200-TX display control capability can also be triggered by an
external control system.
A power button on the front panel can be used for manual on/off control
of either the HDVS-200-TX or the display. Front panel volume controls
are also available to control the display's internal audio, or another
device with volume control, such as a DSP or another switcher.
Consumer Electronics Control (CEC): Atlona does not guarantee the
function of CEC with all televisions. We can confirm proper operation
with many current Samsung, Panasonic, Sony, and LG TVs. Many
manufacturers do not support the CEC "off" command when sent from a
source and older TVs use proprietary commands. Atlona only supports
those TVs that follow CEC command structure from HDMI 1.2a and support
the "off" command when issued by a source. We encourage any dealer to
get evaluation product from Atlona prior to designing a system around
this control technology or be prepared to use other methods to control
their displays if Atlona CEC is not compatible with the installed
displays.
Reliable Auto-Switching
The HDVS-200-TX automatically selects an input source based on
detection of the 5 volt hot plug detect (HPD) signal, as well as active
video. This ensures reliable auto-switching operation for all video
sources, including DVRs, DisplayPort / Mini DisplayPort adapters, and
other devices that always maintain the HPD line at the 5 volt "high"
state but may not be delivering active video.
Applications
- Complete system applications
- The HDVS-200-TX and OME-RX21 or HDVS-200-RX together provide a
compact, yet comprehensive and cost-effective system integration
solution with automatic input selection, HDBaseT extension, display
control capabilities, room control, and essential audio processing.
(See this featured application as an example.)
- Larger system applications
- The HDVS-200-TX is ideal for extending AV connectivity from a central
equipment rack to remote locations such as lecterns and conference
tables, where presenters can easily access the system. (See these
featured applications as examples: small conference room, larger
conference room, and divisible room.)
- Applications requiring local
power - The AT-HDVS-200-TX is available with an external power
supply as the AT-HDVS-200-TX-PSK kit for applications where AV and
control must be extended to a third-party receiver, or a display with
an HDBaseT input.
Features
- 3×1 HDBaseT switcher
- Features two HDMI inputs plus a VGA input with audio
- Allows advanced HDMI display devices to be used with legacy VGA
sources
- Audio input can be assigned to any of the video inputs
- Audio-only playback available without video signal present
- Remotely powered via PoE (Power
over Ethernet)
- IEEE 802.3af PoE Powered Device (PD)
- Power for transmitter is supplied by the AT-OME-RX21,
AT-HDVS-200-RX, or other Atlona device over HDBaseT
- Saves time and integration costs
- AT-HDVS-200-TX-PSK available for applications where the
transmitter with an external power supply is needed for use with an
HDBaseT-equipped projector or third-party HDBaseT receiver
- Automatic display control
- Automatically changes display power state based on active or
standby mode of the switcher. Control signals to display are
transmitted via IP, RS-232, or CEC.
- Enables display and volume control. CEC enables control of
consumer displays.
- Eliminates the need for a complex AV control system
- Automatic input selection using
hot plug detect and video detection technology
- Selects active input when sources are connected or if there is
a change in source power status
- Enables simplified, automatic system operation with no user
intervention necessary
- TCP/IP and RS-232 control of
switcher
- Flexible control options for compatibility with third-party
control systems
- Reduces integration time and costs
- 4K/UHD capability @ 60 Hz with
4:2:0 chroma subsampling
- Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
- Allows 4K/UHD transmission when used with a compatible
HDBaseT-equipped display or HDBaseT receiver
- HDCP 2.2 & 1.4 compliant
- HDCP 1.4 compliant when used with the AT-HDVS-200-RX
- HDCP 2.2 compliant when used with an HDCP 2.2 compliant
receiver or switcher, such as the AT-OME-RX21, AT-HDVS-SC-RX, or
AT-UHD-EX-100CE-RX-PSE
- Allows protected content stream to pass between authenticated
devices
- Extended distance HDBaseT
extension
- Transmits AV, control, and Ethernet up to 330 feet (100 meters)
@ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable
system installation
- EDID management
- Manages EDID communications between source and switcher; allows
integrators to force a source to a preferred resolution
- Ensures desired audio formats and video resolutions are
provided to the AV system
- HDCP management
- HDCP compliance can be disengaged through AMS or a control
system
- Allows non-protected material from PCs to pass to non-compliant
displays, streaming devices, and teleconference systems; protected
content is not transmitted
- Front panel input select button
- Overrides auto-switching when more than one active source is
present
- Simple manual operation allows presenter to maintain control of
AV system
- Front panel display on/off
control
- Remotely controls display power state
- Alternate mode available to mute video output and send display
into standby
- Eliminates need for manual operation of display or use of IR
remote control
- Front panel volume control
- Remotely controls a display's internal audio volume using
TCP/IP or RS-232
- Muting also available via AMS or third-party control system
- Eliminates need for manual operation of display or use of IR
remote control
- Integrated HDBaseT link status
monitoring
- Continuously monitors integrity of the HDBaseT cable link
between the transmitter and the receiver
- Web GUI provides real-time link status, plus detailed HDBaseT
and HDMI signal information
- Quick, easy verification or troubleshooting of RJ-45
termination or twisted pair cable quality
- Configured and managed by AMS
(Atlona Management System)
- This IP-controllable product is remotely managed by the Atlona
Management System software
- Integrates product configuration, management, and updates to
reduce installation time and enable remote support
- Field-updatable firmware
- Rear panel USB port provides an easy means for device updates
- Ensures long-term system return on investment
- Front panel power and input
selection status LEDs
- LED indicators provide power and input selection status
information
- Provides easy setup and troubleshooting
- Included accessories
- User guide and surface mounting brackets
Technical Specifications